FERREX HL520, User Manual

Page: 30 / 38

26 AFTER SALES SUPPORT

support@scheppach.com.au

1300 855 831
MODEL: HL520 PRODUCT CODE: 700726 04/2021
AUS Hotline Costs: Local rate for landline calls*
*Charges may vary dependent upon network operator or mobile network provider.
AUS
Maintenance and repair
Regularly check the oil level.
Too low an oil level damages the oil pump.
Regularly check the hydraulic connections and bolts for tightness.
Re-tighten if necessary.
Upon low oil level, oil refilling is required.
Dispose of the used oil in a correct manner at a public collection facility.
It is prohibited to drop old oil on the ground or to mix it with waste.
We recommend the following hydraulic oils:
• Aral Vitam gf 22
• BP Energol HLP-HM 22
• Mobil DTE 11
• Shell Tellus 22
or oils of same quality.
Do not use any other types of oil as they would influence the function of the hy -
draulic cylinder.
Before undertaking any maintenance or checking work, the working area must be
cleaned. Keep the necessary tools within the reach of your hand.
The intervals mentioned herein are based on normal conditions of use. An exces-
sive use of the machine shortens the intervals accordingly.
Clean the switch box and control levers with a soft cloth. The cloth should be dry
or slightly humid with a neutral cleaning agent. Do not use any solvents like alco-
hol or benzene as they could damage the surfaces.
Store oil and grease outside the reach of unauthorized personnel. Strictly follow
the instructions on the bins. Avoid direct contact with the skin. Rinse well after
use.