Use
18
NOTICE!
Risk of damage!
Improper handling of the grass trimmer can damage it.
− To avoid unnecessary wear and tear, use the plant guard /
cutting width indicator and protective cover.
− Do not cut wet grass.
− Keep the grass trimmer away from hard objects. To prevent
unnecessary wear and tear, avoid cutting hard objects.
Adjusting the height of the guide bar
To ensure an optimal working position, adjust the height of the telescopic
guide bar
8
as necessary.
1. Place the grass trimmer on the ground.
2. Open the locking mechanism
10
for the telescopic guide bar (see
Fig. F
).
3. Pull the guide bar to the desired height.
4. Close the locking mechanism.
Adjusting the additional handle
To ensure an optimal working position, adjust the additional handle
5
on the grass
trimmer as necessary. Always ensure that the teeth on the additional handle and the
bracket
18
are properly engaged, and that the additional handle is firmly fixed in
place.
1. Place the grass trimmer on the ground.
2. Loosen the tensioning screw
7
of the additional handle (see
Fig. G
).
3. Set the desired position for the additional handle.
4. Re-tighten the tensioning screw for the additional handle.
Setting the inclination angle
WARNING!
Risk of injury!
If the taper angle of the motor housing is set incorrectly, injury or
damage to the grass trimmer may result.
− Use the grass trimmer only if the motor housing and the
