Ferrari 599 GTB FIORANO, Owner'S Manual

Page: 92 / 189

92
desired RPM for the standing start is
reached (typically the maximum torque
RPM). On releasing the brake pedal, the
best standing start performance is
achieved thanks to a clutch engagement
strategy optimised for that RPM.
Push start (F1 gearbox)
In the event that the ignition system
malfunctions, you can “push start” the
vehicle as follows:
- perform the “system starting” procedure
(see page 84);
- as the vehicle is gaining speed, request
an UP-shift with the gearshift in
N
.
This procedure should be avoided
unless there is an emergency situation!
Restarting the engine (F1)
In the event that the engine is turned off
accidentally, restart it using the ENGINE
START
button, turning the key to
0
and
then to II : the engine will start
immediately.
Starting and driving the vehicle
(F1 gearbox)
Starting the engine
Before starting the engine, make sure that
the alarm system and all electrical devices
with high power absorption are turned
off.
- Ensure that the handbrake is engaged.
- Put the gearshift lever into neutral.
1
R
3
5
2
4
6
- Fully depress the clutch pedal without
pushing the accelerator.
- Turn the key to position
II
and wait
until the words Check in corso (Check
in progress) appear on the multi-
function display.
- Press the ENGINE START button and
release it as soon as the engine starts. Do
not hold the
ENGINE START
button
down for a long time.
If the vehicle fails to start, turn the key
back to position
0
before repeating the
procedure.
- After the engine has started, the words
Check OK
will be displayed. If the
words Check OK do not appear, turn
the key back to position 0 , wait a few
seconds and repeat the procedure.