Ferrari 488, Owner'S Manual

Page: 169 / 270

169
About your Vehicle
3
F
G
H
Lumbar support adjustment (Full Electric option)
Use control
F
to adjust the lumbar support. Push the control on the
seat symbols to increase or decrease the lumbar support.
Backrest and cushion side width adjustment (Full Electric option)
Use control G to pneumatically adjust the width of the backrest
sides and the seat cushion. Push the control on the seat symbols to
increase or decrease the side width.
Driver’s seat position memory (Full Electric option)
When a door is open and the instrument panel is switched off, the
seat can be moved for a limited period (approx. 15 sec.). Each time
a door is opened or both doors are closed and the key is set to
OFF, the seat can be moved again for a limited period.
The seat position can only be memorised when the instrument
panel is activated, by pressing one of the three buttons 1, 2 or 3
(
H
) each one corresponding to a memorisable position.
Pressing one of these buttons for longer than 3 seconds memorises
the position of the driver seat, rear-view mirrors and steering wheel
(confirmed by emission of a double tone).
To recall the memorised position, press one of the buttons
H
and
release it within 3 seconds. Operation begins as soon as the button
is released.
Recalling the memorised position is not allowed when the vehicle
is in motion. If the vehicle starts to move while the memory recall is
being operated, the seat and column do not stop moving and reach
the memorised position.
With reverse gear engaged, the position of the passenger external
rear-view mirror can be adjusted to a position other than the
driving position, to help parking manoeuvres. This position can be
memorised along with all the other memorisable positions.
If the personalised reverse gear position is never set, when the
reverse gear is engaged, the passenger external rear-view mirror
will in any case move slightly downwards and inwards (compared
with the driving position).