Ferplast HY1001, Instruction Manual, Page: 2 / 16

1
THANK YOU VERY MUCH FOR SELECTING OUR PRODUCT. THIS
INSTRUCTION MANUAL DESCRIBES CORRECT OPERATING
METHOD TO ENSURE PROLONGED SERVICE LIFE. PLEASE READ
AND COMPLETELY UNDERSTAND THIS MANUAL BEFORE
OPERATING THE LOW PROFILE LIFT TABLE. ALWAYS KEEP THIS
MANUAL AT AN APPROPRIATE PLACE. IF THE MANUAL OR
WARNING DECAL IS MISSING, PLEASE CONTACT WITH DEALER.
Note: This Manual has been prepared for skilled and competent
personal. It provides instructions for using the product correctly and
parts list. This Manual cannot replace the professional skills and
expertise of the user.
1.
WARNING! If operating the lift table improperly,
a person may be seriously injured. Therefore,
operate properly according to the following
instruction
.
◇
Read & thoroughly understand the Instruction Manual completely
before using. Follow all safety instructions strictly.
◇
It is necessary to check all safety devices before operation.
◇
Make sure that there are no obstacles in the working area.
◇
Do not put foot or hand in scissors mechanism or through frame.
◇
Screw the lifting eyes on the base frame before working on the lift
table.
◇
Do not overload the lift table. Load should be distributed on the table
according to relevant load distribution chart.
◇
Pay attention if local voltage and frequency is as same as the input
specification of the lift table.
◇
Use the lift table on flat and solid ground.
◇
All the electrical connection and disconnection operations must be
carried out by skilled and competent personal.
◇
While operation, it is forbidden to contact the moving parts of the lift