Ferno Transcend Chair Series User Manual Download Page 13

Page: 13 / 44

Power System

4.1 PowerTraxx Components

The PowerTraxx (Figures 1 and 2) consists of the following components:

●

CONTROLLER: The controller attached to the lift bar allows the

operator to control the direction of the belts, the scene lights and

monitor the battery and wireless connection.

●

CONTROL BUTTONS: The

and

control buttons are attached

to the controller.

●

SCENE LIGHTS (2): LED lights located on top of the power unit and
are controlled by the

button on the controller.

●

CONTROLLER BATTERY: The battery is inside the controller and

provides power to the conroller. See “Controller Battery” on page

32.

●

BELT (2): The belts engage the stairs. The motor powers the belts.

The user controls the direction using the control buttons.

●

MAIN BATTERY: The battery attaches to the power unit and

provides power. It is easily to remove, charge, and reattach. See

“Main Battery” on page 14.

●

POWER UNIT: The power unit located between the tracks receives

input from the buttons to control the direction of the belts. It also

monitors other aspects of the chair.

●

WIRELESS COMMUNICATION: Wireless connectivity provides

communications between the power unit and controller.

●

SPEED LIMITER (part of the power unit): If the system loses power,

the belts are free to rotate for non-powered descent. However, the

speed limiter retards the speed of the belts to improve operator

control for the descent.

4 - POWERTRAXX SYSTEM

WARNING

DO NOT OPEN POWER UNIT.

No user-serviceable parts inside. Contact

Ferno for service.

Controller

Control Buttons

Main Battery

Power Unit

Scene Lights (2)

Belts (2)

Main Battery

Power Unit

Belts (2)

Controller Battery

Summary of Contents for Transcend Chair Series













































Search results

Summary of Contents for Transcend Chair Series

Reviews:

Related manuals for Transcend Chair Series

Brands by name

Popular brands

Ferno Transcend Chair Series, User Manual

Search results

Summary of Contents for Transcend Chair Series

Reviews:

Related manuals for Transcend Chair Series

Brands by name

Popular brands