Ferno Stat Trac 185-103 User Manual Download Page 19

Page: 19 / 24

Parts and Service, Accessories

8 - PARTS AND SERVICE, ACCESSORIES

8.4 Accessories

Ferno offers a full line of accessories approved for installing the Stat

Trac. Always follow the instructions packed with accessories. Keep the

instructions with this manual.
Ferno also offers a full line of emergency products for the EMS

professional. Contact Ferno or your Ferno distributor for product

information. See “Ferno Customer Relations” on page 2.

8.5 Parts List

REQUIRED COMPONENTS

Kit #

Description

Use With

056-7056

Floor Plate/Shim Kit (2 each)

185-86, 185-91

056-7058

Floor Plate/Shim Kit (3 each)

185-96, 185-103

INSTALLATION TEMPLATES

Kit #

Description

Use With

082-2471

Installation Template

185-86

082-2479

Installation Template

185-91

082-2472

Installation Template

185-96

082-2473

Installation Template

185-103

STAT TRAC ACCESSORIES

Kit #

Description

Use With

082-2407

Integrated Charging System (ICS) for Stat Trac

All

081-9540

Safety Yellow Touch-up Paint

All

081-9977

Black Touch-up Paint

All

056-7055

Beauty Ring Kit

185-86, 185-91

056-7061

Beauty Ring Kit

185-96

056-7062

Beauty Ring Kit

185-103

056-7057

Deluxe Retrofit Install. Kit

185-86, 185-91

056-7060

Deluxe Retrofit Install. Kit

185-96

056-7059

Deluxe Retrofit Install. Kit

185-103

Notee:

(1)

The ICS accessory listed is the module that attaches to the Stat

Trac. Additional components are needed for a complete ICS cable and

charging system. Contact Ferno for details.

Notee:

(2)

The three Deluxe Retrofit Installation Kits include plastic covers to

cover mounting points for a Ferno® Model 175 fastening system plus shims

and beauty rings for use with the Stat Trac floor plates.

8.3 Retrofitting a Cot for Stat Trac

If your cot does not have the required Stat Trac components (loading

posts and release handle or lever), the cot must be retrofitted to make it

compatible with the Stat Trac.
Contact EMSAR (above) or Ferno (page 2) for information.

8.1 U.S.A. and Canada

In the United States and Canada, to order parts or for professional

repair, contact EMSAR

– the only agent authorized by Ferno to manage,

service, and repair Ferno products.

Telephone (Toll-Free)

1.800.73.EMSAR

Telephone

1.937.383.1052

Fax

+1.937.383.1051

Internet

www.EMSAR.com

8.2 Worldwide

To order Ferno parts, and for professional repair, contact your Ferno

distributor. Your distributor is the only agent authorized by Ferno to

manage, service, and repair Ferno products.

WARNING

Improper parts and service can cause injury. Use only

Ferno parts and Ferno-approved service on the Stat Trac.
Modifying the Stat Trac can cause injury and damage. Use

the Stat Trac only as designed by Ferno.

Summary of Contents for Stat Trac 185-103

























Search results

Summary of Contents for Stat Trac 185-103

Reviews:

Brands by name

Popular brands

Ferno Stat Trac 185-103, User Manual

Search results

Summary of Contents for Stat Trac 185-103

Reviews:

Brands by name

Popular brands