Ferno One Man 27-1 User Manual Download Page 2

 © Ferno-Washington, Inc.    234-1862-03    July, 2001

2

Users’ Manual

Model 27-1 First-Call Cot

Disclaimer

This manual contains general instructions for the use, operation
and care of this product. The instructions are not all-inclusive.
Safe and proper use of this product is solely at the discretion of
the user. Safety information is included as a service to the user.
All other safety measures taken by the user should be within
and under consideration of applicable regulations. It is
recommended that training on the proper use of this product
be provided before using this product in an actual situation.

Retain this manual for future reference. Include it with the product
in the event of transfer to new users. Additional free copies are
available upon request from Customer Service.

Proprietary Notice

The information disclosed in this manual is the property of Ferno-
Washington, Inc., Wilmington, Ohio, USA. Ferno-Washington,
Inc. reserves all patent rights, proprietary design rights,
manufacturing rights, reproduction use rights, and sales use
rights thereto, and to any article disclosed therein except to the
extent those rights are expressly granted to others or where not
applicable to vendor proprietary parts.

© Copyright Ferno-Washington, Inc. All Rights Reserved.

Ferno-Washington, Inc.

70 Weil Way

Wilmington, OH 45177-9371

U.S.A.

Telephone (U.S.A. and Canada) . 800.733.3766
Telephone (Worldwide) ............... 937.382.1451
Fax (United States) ...................... 937.382.1191
Fax (Outside U.S.A.) .................... 937.382.6569
Internet ..................................... www.ferno.com

EuropEan rEprEsEntativE

Ferno (UK) Limited, Stubs Beck Lane, Cleckheaton

West Yorkshire BD19 4TZ, United Kingdom

Telephone 

+44 (0) 1274 851999

Fax 

+44 (0) 1274 851111

Internet 

www.ferno.co.uk

234-3468-00

Summary of Contents for One Man 27-1




















Reviews: