background image

© Ferno-Washington, Inc. / 234-0008-09 / February 2018

4

1 - SAFETY INFORMATION

1.1 Warning

Warning safety alerts indicate a potentially hazardous situation that, if 

not avoided, could result in injury or death.

1.4  Bloodborne Disease Notice

To reduce the risk of exposure to blood or other potentially infectious 

materials when using the cot, follow the disinfecting and cleaning 

instructions in this manual.

1.5  Fastening System Compatibility

Combining different manufacturers’ products such as a Ferno cot/

transport system with a non-Ferno fastening system can increase the 

user’s risk of injury and damage.
Ferno-Washington, Inc. products are designed for use only with Ferno-

manufactured fastening systems. Use of a Ferno cot/transport system 

with a non-Ferno fastening system is misuse of the Ferno product. The 

user assumes responsibility for the outcome of known, intentional 

misuse.

Safety Information

1.3 Tip

Tips provide recommendations for easier use of the product.

 

WARNING

Untrained operators can cause injury or be injured. 

Permit only trained personnel to operate the cot.
Helpers can cause injury or be injured. Maintain control 

of the cot, operate the controls, and direct all helpers.
Improper use of the cot can cause injury. Use the cot only 

for the purpose described in this manual.
Attaching improper items to the cot can cause injury. Use 

only Ferno-approved items on the cot.
Improper operation can cause injury. Operate the cot 

only as described in this manual.
An unrestrained body can fall off the cot. Use restraints to 

secure the body on the cot.
Rolling the Model 24H cot in the loading position can 

cause it to tip. Use a rolling position when rolling the cot.
Rolling the cot sideways or in the loading position can 

cause it to tip and injure the operator(s). Roll the cot only 

in a level (Rolling) position and with the loading end or 

control end first.
Improper maintenance can cause injury. Maintain the cot 

only as described in this manual.
Improper parts and service can cause injury. Use only 

Ferno parts and Ferno-approved service on the cot.
Modifying the cot can cause injury and damage. Use the 

cot only as designed by Ferno.

1.2 Notice

Notices emphasize important, but not hazard-related information. 

Failure to follow Notices could result in product or property damage.

 

NOTICE

Summary of Contents for 24 miniMAXX

























Reviews: