10
© Ferno-Washington, Inc 234-0037-05 August 2009
Model 103 Combination Table
Using the Table
5 - Using The Table
5.1 before Placing the Table in service
Personnel who will work with the table need to read this
●
manual.
Set up the table, following the instructions in the
●
Setup
section
on
pages 8 and 9.
Confirm that the table operates properly. See
●
Inspecting the
Table,
page 12.
5.2 general guidelines for Use
The table is for professional use only, by a trained operator.
●
Follow standard mortuary-service procedures when using
●
the table.
Lift only the weight you can safely handle. Use additional
●
help when working with a heavy body.
Operation Requires
One Trained Operator
Load Limit
Warning
improper operation can cause injury. Operate
the table only as described in this manual.
5.3 swivel locks
Each of the four wheels is fitted with a locking caster. Lock the
casters to help hold the table steady and unlock the casters to roll
the table.
To lock a caster, turn the swivel lock toward the end of the
●
table (Figure 5).
To unlock the caster, turn the swivel lock toward either of the
●
long sides of the table (Figure 5).
To help prevent the table from rolling during use, lock the
●
casters at 90° angles as shown in Figure 6:
(1) Align two wheels of opposite corners parallel to the
long sides of the table and lock them.
(2) Turn the remaining two wheels perpendicular to the
long sides of the table and lock them.
Figure 5 - Using the Swivel Lock
Figure 6 - Configuring the Casters
To Hold the Table Stationary
Caster (4)
