41
© Ferno-Washington, Inc 234-3479-02
41
9.11 interconnect Cord
The interconnect cord (Figure 62) physically connects the
control panel with the motor. It serves two purposes:
●
(Optional) The interconnect cord can be connected
permanently to bypass the wireless system. If you
decide to use the interconnect cord permanently,
arrange the cord so it will not be pinched by opening,
closing, or using the chair.
●
The interconnect cord can re-establish the wireless
link between the control panel and motor. The control
panel and motor are linked during assembly and should
not lose contact during normal use. If the connection is
lost, do the following to re-link the components:
1. Open the access door to the control panel batteries and
connect the telephone-style plug on the interconnect
cord to the port on the control panel (Figure 63).
2.
Use a flat-blade screwdriver to remove the two screws
and wireless antenna (Figure 64).
3. Plug the serial plug on the interconnect cord into the
port on the motor (Figure 65).
4. Turn the power switch and allow the unit to
synchronize the wireless controller to the motor.
5. Disconnect the interconnect cord and reattach the
wireless antenna and control-panel access door.
Maintenance
Telephone-Style Plug
Serial Plug
Carrying Case
(Style May Vary)
62
63
64
65