20
© Ferno-Washington, Inc 234-3479-02
20
6.3 Mode button
The mode button is the Ferno logo
.
Press and hold
for four seconds to show the chair status
on the display (Figure 21). The display will show the current
voltage and amperage used by the power system, plus the
revolutions per minute (RPM) of the motor.
Note:
The RPM indicator tells only the speed of the motor,
not the belts.
The chair can be used normally while the status screen is
displayed. To return to the standard screen, press the mode
button briefly.
Control Panel
6.4 Display: ascending (UP)
or Descending (Down)
When a paddle is pressed, the display shows your choice of
direction by displaying the word “UP” or “DOWN” (Figure
22). The text is shown while the tracks are in motion. When
the paddle is released, the display returns to the standard
screen.
21
22
Mode Button
