Pag 13
VDS iLoft Kit
VDS iLoft Kit
2
a
b
c
5"
¸
+
F1 F2
a) Hundreds: Press the
button
b) Tens: Press the
button
c) Single unit: Press the
button
4º.
Exit Programming:
Press the «OK» to confi rm the selected number. You return to the
previous programming menu.
Once you reach 9, if you press it again,
it returns to 0. The next time you press, it
will start at 1.
Administrator Menu
Select the fi rst option:
The icons viewed on-screen are controlled
via the corresponding buttons on the monitor.
3º. Programme the call number:
Each time the button
corresponding to hundreds, tens or single units is
pressed, the fi gure goes up that fi gure and is shown
on the DISPLAY.
The fi rst thing the monitor then does is indicate the
number of the current monitor on the SCREEN. If it is not
programmed, it will show the following:
- - -
2.
When in the User menu, enter in ADMINISTRATOR menu (pressing F1 + F2 simultaneously
for 5 seconds). Once in the ADMINISTRATOR menu, select the fi rst option.
Note: When the terminal has not been programmed the
blue led will fl ash very slowly.
Summary of Contents for Video Cityline iLOFT 3-8 Set
