16
NEO MEET INSTALLER MANUAL
5.1. DEVICE
Provides some technical information regarding the equipment, as a reference.
5.2. GENERAL
Allows the configuration of the identification parameters of the monitor within the
installation.
• BLOCK:
Block number of the apartment where the monitor is installed. 3 digits
(001-009).
•
APART:
Number of the apartment where the monitor is installed. 4 digits (0001-9899).
•
MONITOR:
Number (from 0 to 9) assigned to each of the monitors installed in the
same apartment, if there are several. If there is only one, leave the default value “0”.
•
DEVICE TAG:
Name that will be shown in the monitor when the function INTERCOM
is being used.
•
SYNC CODE:
Synchronisation code with the rest of the monitors installed in the
same apartment. It has to be the same in all of them. Default is 123456.
•
NUMBER OF CONCIERGES:
Choose between 0 and 9 the number of concierges
that will be available for this monitor. Depending on the selected number, some
additional fields, to identify the corresponding concierges will appear below.
•
CONCIERGE X:
Select the GU number to call.
•
TAG:
Name that will be shown in the monitor when a call to concierge is being made.
•
FIRMWARE:
Version of the
installed firmware.
•
DEVICE:
Block, Apartment
No., Monitor No.
•
MAC:
Monitor MAC number.
•
IP:
IP address assigned to the
monitor.
Summary of Contents for NEO MEET
Page 1: ...NEO MEET INSTALLER MANUAL...
