Fermax MS-BOX, User& Installer'S Manual

Page: 15 / 24

1 5
MONITOR SETTINGS
Call Volume Setting
To set up the different monitor parameters, it is necessary to access the configuration mode .
To access configuration mode , press the « » for 2 seconds. The LED blinks once per
second and a confirmation tone is heard.
When in configuration mode, press the
« + »
button to select high volume or «
-
» to select low
volume .
Call Tone Selection and Call Cancellation
When in configuration mode, press the « » button again.
Now, press the
« + »
button to change the monitor call tone.
Image Configuration
Press the button again in tone selection . The LED flashes once every two seconds,
indicating that the monitor is in image configuration mode.
The monitor has 4 pre-established configurations with a certain level of shine, contrast and
colour
.
Press the button « + » to alternate sequentially between the different shine and contrast
configurations.
(When you reach the first or last configuration option a warning tone will sound).
Press the button «
-
» to alternate sequentially between the different colour configurations.
Enter
configuration
mode
(2 sec.)
Set call volume
Select call tone and call
cancellation
Image configuration