16
Configuration for SIP server integration
Configure the SIP parameters as explained below, for the cases where the KIN panel works as an
extension of a SIP server.
Contact with the SIP server administrator to get some of the information required in this section.
ENABLE SIP
: Select this box to enable SIP functions.
SIP SERVER
: Indicate the sip SERVER address. Format ->
sip: IP_SERVER
DOMAIN:
domain of the SIP server or IP address
OUTBOUND:
Not necessary. Leave it in blank.
STUN IP:
domain of the SIP server
STUN PORT:
Used for the configuration of Internet SIP server-based installations. It is usually
port 5060. Check with your network or SIP server administrator.
H.264:
Depends on the SIP SERVER. In the case of doubt, leave the default value.
SIP USER, SIP PASSWORD:
Indicate the user and password that this terminal is programmed
in the SIP server.
CONVERSATION, RING TIME:
No function.
