Page 8
3.3 Network Settings
MEET allows to the installer to define the IP range according to the project needs and make
the network management easier. MEET panel network mode is static mode. Ensure that each
device has a unique IP address in same installation. The devices (digital panel, monitor and
guard unit) will show IP conflict if there same IP is used on the same LAN.
IP
: IP address of the panel (default option 10.1.1.2).
MASK
: Subnet mask of the panel (default option 255.0.0.0).
GATEWAY
: Default gateway of the panel (default option 10.254.0.1).
DNS
: DNS of the panel (default option 8.8.8.8).
SOFTWARE IP
: IP address of PC where MEET management software is installed.
(default option 10.0.0.200).
SW. PIN
: The pin code is to be used when the panel is registered in MEET management
software.
