Pag 31
Kit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoft
Parameters Reset
It is possible that at some point you may want to retrieve the
original
configuration
of
the reader. To make this task easier, a
Reset Code
has been included for the reset of:
- User Programming Code
- Administrator (Installer) Code
- Master Proximity Card.
1.
Disconnect the panel power supply.
2.
Keep the bell
key pressed and supply power to the panel and a beep is
heard.
3.
Release the bell key and “Programmer Code: 00000” is shown on the screen.
4.
Enter the
Reset Code: 11090
. You have 1 minute to introduce this code.
Note:
Reset is an irreversible operation.
27 ºC
10:54
Programmer code:
0 0 0 0 0
27 ºC
10:54
To call press
Beeeeeeeep!!!
2
3
27 ºC
10:54
Reset Codes
27 ºC
10:54
Programmer code:
1 1 _ _ _
. . . .
27 ºC
10:54
Programmer code:
1 1 0 9 0
The panel resets the power
supply and the default codes
are now updated.
4
1
Once reset is complete, the User and Administrator codes return to their default
configuration and the Master Card is deleted.
The steps for resetting the parameters are:
