-11-
10. Specification
2) Door Lock Controlled with External
Power
1. The external power supply must be used
according to the lock.
2. The jumper must be taken off before
connecting.
3. Setup the
Unlock Mode Parameter
for
different lock types
•
Power-on-to-unlock type:Unlock
Mode=0(by default)
•
Power-off-to-unlock type:Unlock
Mode=1
4. If different unlocking time is needed,
change the unlock time on door station,de-
tail information refer to DT system techni-
cal guide .
Power-on-to-Unlock type:
12V 300mA
Jumper position in 1-2
+12V
LK -
LK+
N.O.
EB-
EB+
+
-
JP_LK
1 2 3
Exit button
Power-off-to-Unlock type:
Power-off-to-Unlock type:
+
+
-
-
+12V
LK - (GND)
LK+(COM)
N.O.
EB-
EB+
Take off the Jumper
JP_LK
Cut off the line
1 2 3
Exit button
+12V
LK - (GND)
LK+(COM)
N.O.
EB-
EB+
Take off the Jumper
+
+
-
-
JP_LK
Cut off the line
1 2 3
Exit button
Power supply: 26Vdc
Power Consumption Of Outdoor Station:
1W in standby;
5W in working.
Power Consumption Of Indoor Unit:
0.2W in standby;
6.2W in working.
Unlock Power output: 12Vdc,250mA
Unlock timing: 1~99s
Working temperature: - 20ºC ~ +55ºC
Wiring: 2 wire, non-polarity
Dimension:
140(H)×220(W)×17.5(D)mm(Indoor Unit)
313(H)×128(W)×63(D)mm(flush)
313(H)×128(W)×70(D)mm(surface)
