Fermax DUOX SKYLINE Series, Installer Manual

Page: 33 / 72

Pag 33
Pag 33
DUO DUO
DUO DUO DUOX
X
X X X A
A
A A Audio Sk
udio Sk
udio Sk udio Sk udio Skyline
yline
yline yline yline
DUO DUO DUO DUO DUOX X X X X A A A A Audio Sk udio Sk udio Sk udio Sk udio Skyline yline yline yline yline
DUO DUO DUO DUO DUOX X X X X A A A A Audio Sk udio Sk udio Sk udio Sk udio Skyline yline yline yline yline
DUO DUO
DUO DUO
DUOX X
X X
X A A
A A
Audio Sk udio Sk
udio Sk udio Sk
udio Skyline yline
yline yline
yline
EN RESTORE DEFAULT VALUES: RESET
1.- Reset amplifier: remove power.
2.- Press the SW1 button, connect power supply and keep SW1
button pressed until you hear the reset confirmation sound:
beep-beep (5 seconds).
RESET Mapping (call button code)
The DUOX amplifier has a ‘Reset’ function which can be used to
restore programmed default parameters.
RESET Programming Code from keypad panels
You can reset the programming access code (if the previous one
is forgotten), to the default code.
1.- Disconnect the panel’s power supply.
2.- Short-circuit between the system´s “Bs” and “-”. If the system is
equipped with an exit button, just press and hold it down.
3.- Reconnect the panel’s power supply and do not remove the
short circuit
.
From the panel with a keypad you can Reset the parameters to the
factory default values.
Download the Direct Panels Programming
Manual, cod. 97701 at www.fermax.com.
See DUOX Advanced Programming Manual cod. 97699.
Lock Release Times
EN RESTORE DEFAULT VALUES: RESET
1.- Reset amplifier: remove power.
2.- Press the SW1 button, connect power supply and keep SW1
button pressed until you hear the reset confirmation sound:
beep-beep (5 seconds).
RESET Mapping (call button code)
The DUOX amplifier has a ‘Reset’ function which can be used to
restore programmed default parameters.
RESET Programming Code from keypad panels
You can reset the programming access code (if the previous one
is forgotten), to the default code.
1.- Disconnect the panel’s power supply.
2.- Short-circuit between the system´s “Bs” and “-”. If the system is
equipped with an exit button, just press and hold it down.
3.- Reconnect the panel’s power supply and do not remove the
short circuit
.
From the panel with a keypad you can Reset the parameters to the
factory default values.
Download the Direct Panels Programming
Manual, cod. 97701 at www.fermax.com.
See DUOX Advanced Programming Manual cod. 97699.
Lock Release Times