Fermax DUOX SKYLINE Series, Installer Manual

Page: 18 / 72

Pag 18
Pag 18
DUO DUO DUO DUO DUOX X X X X A A A A Audio Sk udio Sk udio Sk udio Sk udio Skyline yline yline yline yline
DUO DUO
DUO DUO
DUOX X
X X
X A A
A A
Audio Sk udio Sk
udio Sk udio Sk
udio Skyline yline
yline yline
yline
DUO DUO
DUO DUO DUOX
X
X X X A
A
A A Audio Sk
udio Sk
udio Sk udio Sk udio Skyline
yline
yline yline yline
DUO DUO DUO DUO DUOX X X X X A A A A Audio Sk udio Sk udio Sk udio Sk udio Skyline yline yline yline yline
EN
MASTER Panel:
•
Programming is always done from the panel activated as
MASTER.
•
EAny installation can only have one MASTER panel at a
time, whether a single or multiple block installation, once
configured as a sub-block, block or general entrance.
•
A street panel is configured as a MASTER via the SW1
amplifier button. If the SW1 button is pressed 3 times quickly,
it is activated as a MASTER panel and a confirmation tone
sounds (beep-beep).
•
When a panel is selected as MASTER, it notifies the rest of
the situation and if another was previously configured, it
would automatically stop being so.
•
If there are various blocks in an installation, we recommend
using the general entrance panel as MASTER since it allows
you to program all of its telephones.
•
Once having completed the terminal´s configuration, we
recommend deactivating the MASTER panel to avoid
accidentally reprogramming terminals.
•
The panel deactivates itself from master mode
following the same activation procedure: 3 quick presses
of the
SW1 button. A deactivation tone sounds (beep-bop).
D)
EN
MASTER Panel:
•
Programming is always done from the panel activated as
MASTER.
•
EAny installation can only have one MASTER panel at a
time, whether a single or multiple block installation, once
configured as a sub-block, block or general entrance.
•
A street panel is configured as a MASTER via the SW1
amplifier button. If the SW1 button is pressed 3 times quickly,
it is activated as a MASTER panel and a confirmation tone
sounds (beep-beep).
•
When a panel is selected as MASTER, it notifies the rest of
the situation and if another was previously configured, it
would automatically stop being so.
•
If there are various blocks in an installation, we recommend
using the general entrance panel as MASTER since it allows
you to program all of its telephones.
•
Once having completed the terminal´s configuration, we
recommend deactivating the MASTER panel to avoid
accidentally reprogramming terminals.
•
The panel deactivates itself from master mode
following the same activation procedure: 3 quick presses
of the
SW1 button. A deactivation tone sounds (beep-bop).
D)