Ferm PRM1021, Original Instructions Manual

Page: 4 / 128

4
EN
ROUTER
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
For your own safety and for the safety of
others, please read these instructions
carefully before using this appliance. It
will help you understand your product
more easily and avoid unnecessary risks.
Keep this instruction manual in a safe
place for future use.
Introduction
The router has been designed for routing of wood
and wood products. Check the machine, for loose
parts and accessories from transport damage.
Contents
1. Machine specifications
2. Safety instructions
3. Assembly
4. Operation
5. Maintenance
1. MACHINE SPECIFICATIONS
Technical specifications
Voltage 230-240 V~
Frequency 50 Hz
Power input 1200 W
No load speed 9.000 - 30.000/min
Cutting depth 35 mm
Collet 6 & 8 mm
Weight 3.5 kg
Lpa (sound pressure) 86.5dB + 3 dB(A)
Lwa (sound power) 97.5dB + 3 dB(A)
Vibration 4.02 +1.5 m/s 2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
• using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
• the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Contents of packing
1 Router
1 Parallel guide
1 Carbon brush set
1 Template guide
1 Centre pin
1 Adapter for dust extraction
1 Spanner
1 Collet 8 mm (assembled on the machine)
1 Collet 6 mm
3 Router bits
1 Safety instructions
1 Operating instructions
1 Warranty card
Product information
Fig. A+B+C
1. On/off switch
2. Handle
3. Base plate
4. Fixing screws for parallel fence
5. Spanner
6. Collet nut
7. Spindle lock
8. Wing bolt for depth stop
9. Depth stop
10. Clamping lever
11. Plunge depth scale
12. Adjusting wheel for electronic speed control
13. Dust extraction facility
14. Parallel fence
15. Guide rod
16. Depth stop revolver
17. Screws