Ferm
75
•
Ved at anvende en miljørigtig olie til skærebladet beskyttes det mod rust i de perioder,
hvor maskinen ikke bruges et stykke tid.
•
Sæt maskinen til opbevaring på et tørt sted og uden for børns rækkevidde.
•
Den øverste sektion af håndtaget kan foldes sammen for at spare på pladsen. Klem ikke
ledningen, når maskinen vendes.
Smørelse
Maskinen behøver ikke ekstra smørelse.
Fejl
Skulle en fejl opstå, f.eks. pga. slidtage af en enhed, kontakt venligst serviceadressen på
garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan bestilles.
Miljø
For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er så
vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.
Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på
en genbrugsplads.
Garanti
Se venligst garantibetingelserne på garantikortet, som er vedlagt separat.
DK
06
Ferm
•
Always keep children and animals at a distance. Make sure anyone in the area remains at a
safe distance when the machine is in operation.
•
The operator is responsible for the safety of third parties whilst using this machine.
•
Do not allow persons unfamiliar with the instructions, children, or persons under the
influence of alcohol, drugs or other substances to use the machine.
•
Use the machine solely for the purpose for which it is intended.
•
Use this machine solely when the grass box is fitted or the safety flap is closed.
•
Switch off the motor and wait until the cutter blade has stopped turning before fitting or
removing the grass box.
•
Make sure that all guards are fitted correctly, and that they are in good condition.
•
The cutting blades must be able to turn freely before switching on the machine.
•
Keep your body clear of the turning parts.
•
Keep a safe distance when using the machine.
•
Lay the power cord on the ground where it will be safe.
•
Make sure you adopt a correct working posture, especially on slopes.
•
Always use the machine at walking speed.
•
Warning! The cutter blade will not stop turning immediately the machine is switched off.
•
Switch off the machine, remove the plug from the socket and wait until the cutter blade
has stopped turning before cleaning the machine or carrying out maintenance.
•
Take care when cleaning or maintaining the machine. Take care not to cut your fingers,
and wear protective gloves!
•
Do not move or alter any of the electrical or mechanical safeguards.
•
Use the machine solely when there is sufficient daylight or artificial light.
•
Wear suitable work clothing and sturdy shoes.
•
Make sure that the area where the lawnmower is to be used is clean. Whilst you are using
the lawnmower also check for any objects that could damage the machine.
•
If an object nevertheless comes into contact with the machine, then stop and check
whether the machine is damaged. Have any damage repaired before you use the machine
again.
•
Switch off the machine immediately if it suddenly begins to vibrate. Inspect the machine
to determine the cause.
•
Check the machine thoroughly before use. Only use the machine when it is in good
condition. Do not use the machine if you observe a defect; have it repaired before you use
it again.
•
Replace any worn or damaged parts. Always use original (spare) parts.
Electricity
•
Before inserting the plug in the socket verify that the information on the socket is correct,
and that it is in agreement with the information indicated on the machine.
•
When the use of a residual current circuit breaker is mandatory verify that the circuit
breaker that is used will trip with a residual current of 30 mA. Consult an electrician.
•
Never run the machine over the power cord. Make sure that you always know where the
power cord is lying on the ground.
•
Use the special cable-holder to connect the plug to the extension cable.
•
Never use the machine in the rain, or on wet or damp grass. Never leave the machine
outdoors.
•
Check that the power cord is in good condition before you use the machine. Do not use the
machine if the power cord is damaged; have it replaced by a recognized service centre.
GB
