10
Ferm
CORDLESS DRILL
THE NUMBERS IN THE FOLLOWING TEXT COR-
RESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL DATA
PRODUCT INFORMATION
Fig. A
1 On/off switch
2 Speed selector switch
3 Torque setting ring
4 Chuck
5 Battery
6 Direction switch
CONTENTS OF CARRYING CASE
The carrying case contains:
1 Cordless
drill
1 FDC-1800B
battery
1 FDC-1800L battery charger
1 Operating
instructions
1 Safety
instructions
1 Warranty
card
Check the appliance, any loose parts and accessories for
damage caused during transport.
SAFETY INSTRUCTIONS
The following pictograms appear throughout these
operating instructions:
Indicates danger of injury, risk to life and possible
damage to the appliance if these instructions are
not followed.
Indicates the presence of electrical current.
Read through these operating instructions carefully
before using the appliance. Become familiar with the
functions and method of operation. To ensure proper
operation, always maintain the appliance according to
the instructions. The operating instructions and associa-
ted documents should always be kept close to the
appliance.
Ferm products are manufactured to high quality standards
they are safe and fit for purpose at time of sale, but all tools
can be dangerous if the correct precautions are not taken.
Always follow these instructions, do not carry out the ope-
ration until you are sure you can do so in safety. Remember
to consider the work environment for safe operation as well
as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting; drilling or sanding is
dusty, in particular chipboard or MDF.
Approved safety footwear and headgear should worn as
appropriate, for example on building works or when
heavy weights are involved. Wear a suitable apron to
protect against sparks/debris. Wear earplugs or ear def-
enders.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
Voltage
| 18 V—
---
Charger voltage
| 230 V
Charger frequency
| 50 Hz
Battery output
| 1.3 Ah
Charging time
| 1 hour
Drill speeds
| 2
Max. torque (low speed)
| 20 Nm
No-load speed
| 0-400/0-1150 rpm
Chuck capacity
| 0.8 - 10 mm
Weight (incl. battery)
| 1.8 kg
Lpa (sound pressure)
| < 70 dB(A)
Vibration
| < 2.5 m/s
2
Ferm
3
