A damaged part or guard should be properly repaired by
an authorised service centre, unless indicated otherwise
in the instruction manual. Have defective switches
replaced by an authorised service centre. Do not use a
tool if the switch does not turn on and off.
Have your tool repaired by an expert
This appliance is manufactured in accordance with rele-
vant safety standards. Only experts must carry out repai-
ring of electrical appliances, otherwise considerable dan-
ger for the user may result.
Storing tools
When not in use tools should be stored in the dry, out of
reach of children.
ELECTRICAL INFORMATION
This product is complete with a pre-wired mains plug, it
is double insulated in accordance with EN 60335 – no
earth wire is required
If the plug needs replacing follow these instructions.
Wire correctly
The wires in the mains lead are coloured in the following way:
BLUE
•
Neutral
BROWN
•
Live
Securing wires
Secure wires carefully and firmly to the correct termi-
nals. Secure the mains cable in the plug cord grip firmly
Fit a 5-amp fuse. If a 13amp (BS1363) plug is used a (BS
1362) ASTA approved 5-amp fuse must be fitted.
Recycle/Dispose of old plug and cable
Prevent inadvertent connection to socket and risk of
electric shock. If in doubt always consult a Qualified Elec-
trician.
ENVIRONMENT
Recycle the packaging according to the identification
marks on it. At the end of the product or its accessories
life please recycle where facilities exist.
NiCd batteries are recyclable, take them to a local recy-
cling station or phone the Helpline for current advice on
recycling.
HELPLINE
For any questions relating to operational or safety
matters contact:
Ferm Customer Helpline on:
0115 966 1199
Monday-Friday
8am – 6pm
Saturday
9am – 1 pm
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardized documents
EN55014-1, EN-55014-2,
EN61000-3-2, EN61000-3-3,
EN50260-1, EN50260-2-14,
EN60335-1, EN60335-2-29
in accordance with the regulations.
98/37EEC,
73/23/EEC,
89/336EEC
from 20-09-2002
GENEMUIDEN NL
W. Kamphof
Quality department
CE
ı
DECLARATION OF CONFORMITY
(UK)
Blue
(Neutral)
Green & Yellow
(Earth)
Brown
(Live)
Fuse
(5 Amp)
Ferm
9
OMNISAW
THE NUMBERS IN THE FOLLOWING TEXT COR-
RESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL SPECIFICATIONS
DESCRIPTION
Fig.A
1. Base plate and depth guide
2. Collet
nut
3. Spindle lock button
4. Exhaust air vents
5. Removable auxiliary handle
6. On/off slide switch
7. Intake air vents
8. Battery
9. Depth guide bracket
10. Depth guide locking knob
11. Locking knob of depth guide bracket
12. Bit
13. Protection guide cap (not shown)
PACKAGE CONTENTS
1 Cordless Omnisaw
1 Battery 18 V - FCO-18B
1 Battery charger -FCO-18L
1 1/4" collet
1 1/8" collet
1 Wrench
1 Protection guide cap
1 Dust extraction adapter
1 Carrying case
1 Users manual
1 Warranty card
1 Warranty certificate
Check the machine, loose parts and accessories for
transport damage.
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Read through these operating instructions carefully
before using the appliance. Become familiar with the
functions and method of operation. To ensure proper
operation, always maintain the appliance according to
the instructions. The operating instructions and associa-
ted documents should always be kept close to the
appliance.
Ferm products are manufactured to high quality standards
they are safe and fit for purpose at time of sale, but all tools
can be dangerous if the correct precautions are not taken.
Always follow these instructions, do not carry out the ope-
ration until you are sure you can do so in safety. Remember
to consider the work environment for safe operation as well
as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting; drilling or sanding is
dusty, in particular chipboard or MDF.
Approved safety footwear and headgear should worn as
appropriate, for example on building works or when
heavy weights are involved. Wear a suitable apron to
protect against sparks/debris. Wear earplugs or ear def-
enders.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
Voltage
| 18 V—
---
Charger voltage
| 230 V
Charger frequency
| 50 Hz
No load speed
| 23000/min
Battery output
| 1.3 Ah
Charging time
| 1 hour
Weight (incl. battery)
| 1.8 kg
Lpa (sound pressure)
| 70.30 dB(A)
Lwa (sound power)
| 81.30 dB(A)
Vibration
| 0.63 m/s
2
4
Ferm