Ferguson REGENT i350s+, Manual, Page: 91 / 145

2. Increase the volume.
No network
connection can be
established.
1. Check the WLAN function.
2. Try to set an IP address at the device.
3. Activate the DHCP function on the router
and make the connection again at the device.
4. A firewall is activated on the network – set
the respective program in such a way that
access is possible.
5. Reboot the unit to try.
WLAN connection
can’t be established
1. Check the availability of WLAN network on
the access point.
2. Place the device closer to the router.
3. Make sure the WEP/WPA password is
correct.
No station is found. 1. Check the network as well as the access
point and firewall.
2. The station may not be available currently,
try it again later or select another station.
3. The link of the station is changed or the
station no longer transmits – ask the provider
for information.
4. The link of manual added station is not
correct, make sure it is correct and re-enter.
Alarm does not work. 1. Switch on the alarm.
2. Due to the volume setting, refer to the
solutions of “No sound”.