Ferguson REGENT i350s+, Manual, Page: 61 / 145

2.
Getting Started
Get the network ready
 For wireless LAN (WLAN) network connection:
Check if WLAN LINK/ACT light of the wired/wireless access point or
router is illuminated. Consult the user guide of that for any questions.
Note: WiFi allows data transfer over short distances within 20 meters
without the need of cabling between the devices. Any walls or ceilings
may reduce the strength of the WiFi connectivity.
Therefore try to locate the device and/or the access point within the
distance mentioned above, and avoid any obstacles between two
devices.
 Plug the power cord into the AC socket.
 When it is the first time running the device, the system will ask you to
set Language and Network Configurations .
 Select “Yes” to establish connection to the network.
 Select “Yes (WPS)” (only for WPS routers). Then press the WPS
button on your router.
 Select “No” if you would prefer to listen to a terrestrial station or to use
the speaker with an external playback device.
 If selected “Yes”, the display goes to scanning for Wireless Network
and shortly afterwards a list of available wireless networks will appear.
The number of bars in the wireless symbol in front of the network name
(SSID) shows the relative signal strength of the network.
The key symbol indicated that the network is password-protected.
If the device does not find any wireless networks, “No Wireless