D
esig
n and ma
ter
ials can be changed without notic
e. Er
rors and omissions e
xc
ept
ed
DOCUMENTATION -
SWITCHMASTER
- 4 -
D. Adjusting of the cams
for electrical position indication.
Attention!!
The valve and actuator should be adjusted - in case of actuators with adjustable pivoting
angle - before adjusting
the cams.
» A suitable test control unit is necessary for adjusting. (e.g. our Uni-SwitCheck).
» Bring the SWITCHmaster® into neutral switching position!
The adjusting tool (E) has to be used for adjusting the reversing point.
» Fig. A: The lower cam can be adjusted, if the tool is inserted until mark 1: Delivery condition!
» Fig. B: For adjusting the upper cam the adjusting tool has to insert into the opposite recess
until mark 2 is reached
Allocation of the cams and switches
((arbitrary appointment of the allocation)
» The upper cam actuates the upper placed switch for the „Open-position” of the valve. (terminal strip 1-3)
» The lower cam actuates the lower placed switch for the„Closed-position”. (terminal strip 4-6)..
Adjusting of the „OPEN- and CLOSED-position” according to the matrix
Please adjust the lower cam at first, and than the upper cam.
Attention!!
In the adjusting instruction (page 20/21) it is assumed, that the valve (viewed from top) will be closed clockwise!
After position adjusting...
» … the auxiliary tool is not allowed to turn any longer!
» …pull out the auxiliary tool upwards and insert it in the lower recess of the stem, so that the „flag” points to the
» opposite recess!
Abb. A:
Einstellen der
unteren Nocke
Abb. B:
Einstellen der
oberen Nocke
E
2
1
Fig. A
Fig. B
Blindeisenweg 31
D-41468 Neuss
Tel.: +49(0) 2131 - 15 39 28-0
Fax: +49(0) 2131 - 15 39 28-99
Web: www.fergo.biz
E-Mail: [email protected]
copyright © by
FERGO® Armaturen GmbH
