D
esig
n and ma
ter
ials can be changed without notic
e. Er
rors and omissions e
xc
ept
ed
DOCUMENTATION -
SWITCHMASTER
- 3 -
Push the SWITCHmaster® over both feet until the double-D of the cam dips into the slot of the shaft:
When lock-in position of the feet is reached, do not push any further!
The projection of the shaft can be 20, 30, 40 or 50 mm.
Press the clips into the lateral openings until they lock into place. The lateral 4 round openings on each side of the foot and foot
guide have to suit exactly on top of each other.
C. Electrical connection
Only an electrical expert is allowed to connect the unit!
Take off the transparent cap.
Lift the red and green ring from the casing.
Pull out the mounting plate vertically up.
Unscrew the coupling ring of the cable gland and lead-in of the trip line.
Connection of the trip line according to the wiring diagram on the mounting plate.
Re-lock the mounting plate. The recess has to be aligned towards the fitting (see drawing on the right). Tight the fastening screw (A).
Lay out the cable, so that the movement of the red/green rings is not restricted in any way (10 mm distance from black casing).
Tighten firmly the coupling ring of the cable gland.
+
5
6
7
8
9
10
11
12
13
A
Blindeisenweg 31
D-41468 Neuss
Tel.: +49(0) 2131 - 15 39 28-0
Fax: +49(0) 2131 - 15 39 28-99
Web: www.fergo.biz
E-Mail: [email protected]
copyright © by
FERGO® Armaturen GmbH
