Figure 4: Brass drain assembly (Option two)
❑
Plug the other end of the drain assembly into the drain pipe on the floor. It is optional to apply
sealant to this part. You can follow your plumbers’ advice accordingly.
❑
Carefully turn the bath to the correct side and position the bath over the drain on the floor.
❑
Close the bath drain. Fill the bath to the overflow, and check for leaks.
❑
If everything is ok, apply a thin, continuous layer of clear or color-matched 100% silicone sealant
to the seam between the bath and the finished floor.
Care and Cleaning
For best results, keep the following in mind when caring for your FerdY product:
❑
Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
