GB
26
UsE
Switching on and off (fig. A)
● To switch on the machine, set the on/off
switch (1) to the ‘I‘ position.
● To switch off the machine, set the on/off
switch (1) to the ‘0‘ position.
hints for optimum use
● Clamp the workpiece.
● Firmly hold the machine by the grip.
● Switch on the machine.
● Place the sanding pad with sanding paper on
the workpiece.
● Slowly move the machine over the workpiece,
firmly pressing the sanding pad against the
workpiece.
● Do not apply too much pressure on the
machine. Let the machine do the work.
● Switch off the machine and wait for the
machine to come to a complete standstill
before putting the machine down.
CLEANINg AND MAINTENANCE
4
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularly clean the housing with a soft cloth.
● Keep the ventilation slots free from dust and
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
● Regularly clean the sanding pad to avoid
inaccuracies during use.
replacing the sanding paper (fig. B)
● To remove the old sanding paper (5),
proceed as described in the section
„Mounting and removing the sanding paper“.
● To mount the new sanding paper (5),
proceed as described in the section
„Mounting and removing the sanding paper“.
wArrAnTy
Warranty conditions and product liability apply
according to national legislation
ENvIrONMENT
Disposal
8
The product, the accessories, and the packaging
must be sorted for environmentally friendly
recycling.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
