Note:
1. Once charging is completed, be sure to close the anti-dust cover.
2. Recharge a stored light every four months to maintain optimum performance of the battery.
⑥Battery Replacement
Unscrew the tail cap to insert the battery (no need to check the polarity), then screw the tail
cap back on. Remove the insulation sheet before first use.
Usage and Maintenance
Disassembling the sealed head can cause damage to the light and will void the warranty.
Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring
with an approved spare
．
Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts
may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following
reasons:
A: The batteries need replacing.
Solution: Replace batteries (Ensure batteries are inserted according to the manufacturer’s
specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact your authorized distributor.
Warning
This flashlight is a high-intensity lighting device capable of causing eye damage to the user or
others. Avoid shining the flashlight directly into anyone’s eyes.
