Powered by a single 18650 rechargeable Li-ion battery, two 3V/CR123A Lithium batteries can
be used.
USB Type-C charging port, inner waterproofing treatment.
Digitally regulated circuit for maintaining a stable output.
Battery level indication and low voltage warning.
Reverse polarity protection, to protect from improper battery insertion.
Intelligent protection against high surface temperature.
Tactical tail switch for instant activation; functional tail switch for output selection and
strobe.
Functional side switch for white, red and green lights switching.
Made of durable A6061-T6 aluminum.
Premium type HAIII hard-anodized anti-abrasive finish.
Toughened ultra-clear glass lens with an anti-reflective coating.
5.91'' x 1.57'' x 1.0'' / 150 x 40 x 25.4 mm.
5.54 oz /157 g (excluding battery).
Operating Instruction
Three Switches
The round one is the tactical tail switch, the oval one is the functional tail switch; the functional
side switch is for white, red and green lights switching.
ON/OFF
Tap the tactical tail switch to momentarily turn on the light, release and the light will go out.
Fully press the tactical tail switch to constantly turn on the light. Press again to turn off the light.
Output Selection
With the light switched on - single click the functional tail switch to cycle through
Turbo→Low→Med→High.
Red and Green Lights
With the light switched on - single click the functional side switch to cycle through Red
light→Green light; single click the functional tail switch to turn back to the previously used white
light.
Strobe
With the light switched on - press and hold the functional tail switch for 0.8 seconds to activate
strobe, click the functional tail switch or functional side switch to exit strobe.
With the light switched off - press and hold the functional tail switch to rapidly enter strobe,
release and the light will go out.
