PTD55 SERIES OPERATION MANUAL
ESC
a
n
[Name] Select justification
[Format]
ASCII
ESC
a
n
Hex
1B
61
n
Decimal27
97
n
[Range]
<00>H
≤
n
≤
<02>H, <30>H
≤
n
≤
<32>H
[Description]
Aligns all the data in one line to the specified position.
n
selects the justification as follows:
n
Justification
<00>H / <30>H
Left justification
<01>H / <31>H
Centering
<02>H / <32>H
Right justification
[Notes]
●
The command is enabled only when processed at the beginning of the line.
●
This command executes justification in the printing area.
[Reference]
ESC !
[Example]
Left justification
Centering
Right justification
ESC c 4
n
[Name]
Select paper-near-end sensor to stop printing
[Format]
ASCII
ESC c
4
n
Hex
1B 63 34
n
Decimal
27
99 52
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description]
Selects whether the paper-near-end sensor stops printing.
When the bit 1 of
n
is 0, paper near-end sensor does not stop printing.
When the bit 1 of
n
is 1, paper near-end sensor will stop printing.
[Notes]
When bit 1 is on, in paper-near-end is detected, the printer goes offline and stop
printing.
ESC
d
n
[Name]
Print and feed
n
lines
[Format]
ASCII
ESC
d
n
Hex
1B
64
n
Decimal27
100
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description]
Prints the data in the print buffer and feeds
n
character lines.
[Notes]
●
This command sets the print starting position to the beginning of the line.
●
This command does not affect the line spacing set by
ESC 2
or
ESC 3.
●
The maximum paper feed amount is 1016 mm {40”}. If the paper feed amount
(
n
x
line spacing) of more than 1016 mm {40”} is specified, the printer feeds the paper
only 1016 mm {40”}.
●
Every line feed corresponds to the current selected font height (24 dots for Font A
and 16 dots for Font B).
[Reference]
ESC 2, ESC 3
.
36 of 57
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
