PTD55 SERIES OPERATION MANUAL
The time unit is 0.01seg. The examples below shows how it look like different output
signals with the parameters on the right-side.
1s
m
= 0x03
2s
ton
= 100
toff
= 200
1s 1s 1s
m
= 0x03
ton
= 100
toff
= 0
0.5s
m
= 0x07
ton
= 50
toff
= 50
[Notes]
In order to disable an output associated to an event, the same command must be sent
specifying the event in the
m
parameter but setting
ton
and
toff
to 0.
DLE
EOT
n
[Name]
Real-time status transmission
[Format]
ASCII
DLE
EOT
n
Hex
10
04
n
Decimal16
4
n
[Range]
<01>H
≤
n
≤
<04>H
[Description]
Transmits the selected printer status specified by
n
in real-time, according to the
following parameters:
n
= <01>H: Transmit printer status
n
= <02>H: Transmit offline status
n
= <03>H: Transmit error status
n
= <04>H: Continuous paper sensor status
n
= <05>H: Paper sensor status
[Notes]
●
The status is transmitted whenever the data sequence <10>H<04>H<
n
>
(<01>H
≤
n
≤
<05>H) is received.
●
The printer transmits the current status. Each status item is represented by one byte.
●
The printer transmits the status without confirming whether the host computer can
receive data (in serial interface).
●
The printer executes this command upon receiving it.
●
This command is executed even when the printer is offline, the receiver buffer is full,
or there is an error status with a serial interface model.
n
= <01>H: Printer status
Bit OFF/ON Function
0
OFF
Not used. Fixed to OFF
1
ON
Not used. Fixed to ON
2
OFF
Not used. Fixed to OFF
3
OFF
Online
ON
Offline
4
ON
Not used. Fixed to ON
5
OFF
Does not wait for online error recovery
ON
Waits for online error recovery
6
*
ON/OFF Ticket completed
7
OFF
Not used. Fixed to OFF
(
*
) Bit 6 is toggled every time a cut command is executed
28 of 57
