◎
Reverse polarity protection, to protect from improper battery installation
◎
Anti-roll, slip-resistant body design
◎
Tactical tail cap switch with momentary-on function, press once for strobe
◎
Side mode switch button in the front, press once for brightness level selection
◎
Made of durable aircraft-grade aluminum
◎
Premium Type III hard-anodized anti-abrasive finish
◎
Toughened ultra-clear glass lens with anti-reflective coating
Notice: The above-mentioned parameters (tested in lab using quality CR123A primary lithium
batteries) are approximate and may vary between flashlights, batteries and environments.
Operation Instruction
Turning on/off
Press the tail cap switch lightly to activate the flashlight momentarily. Press the tail cap switch
completely to turn on the flashlight and lock it. Another press can turn it off.
Mode selection
A single press on the side mode switch button can select in the cycle of Turbo
→
Low
→
Mid
→
High
→
brightness level;
Press and hold the side mode switch button for about one second to enter into the Strobe.
Press and hold the side mode switch button for about three seconds to enter into the SOS.
Under the condition of Strobe or SOS, a single press on the side mode switch button can return to
the general mode.
The flashlight can memorize the brightness levels in the general mode except for the mode. When
turn it on, it will begin to work in the general mode.
Battery Specifications
Type
Dimensions
Nominal
voltage
Usability
Non-rechargeable Battery
(Lithium)
CR123A
3V
Recommended
√
Rechargeable Battery
（
Li-ion
）
16340
3.7V
Banned
×
Rechargeable Lithium Iron Phosphate
Battery (16340)
16340
3.2V
Banned
×
Note: When using the banned battery, it will probably cause damages to the flashlight.
