Fenix LD22, User Manual

Page: 2 / 9

Ⴟ
Push-button tail cap switch with momentary-on function
Ⴟ
Side mode switch in the front, fast and convenient
Ⴟ
Made of durable aircraft-grade aluminum
Ⴟ
Premium Type III hard-anodized anti-abrasive finish
Ⴟ
Toughened ultra-clear glass lens with anti-reflective coating
Notice: The above-mentioned parameters (lab-tested with 2500mAh Lithium battery) are
approximate and may vary between flashlights, batteries and environments.
Operation Instruction
Turning on/off
Press the tail cap switch lightly to momentarily activate the flashlight. Press the tail cap switch
completely to turn on the flashlight and lock it. Another press will turn it off.
Mode selection
A single press on the side mode switch allows switching between Turbo
ൺ
Low
ൺ
Mid
ൺ
High
ൺ
brightness levels;
Press and hold the side mode switch for about one second to enter into Strobe mode.
Press and hold the side mode switch for about three seconds to enter into SOS mode.
While in Strobe or SOS mode, a single press on the side mode switch returns you to the
non-flashing mode.
LD22 memorizes the brightness level while in the general mode. When turned off and then on, the
flashlight automatically enters the general (non-flashing) mode.
Battery Specifications
Type Dimensions Nominal voltage Usability
Ni-MH battery AA 1.2V Recommended
෭෭෭෭
Alkaline battery AA 1.5V Usable
෭෭෭෭
Non-rechargeable Battery
(Lithium)
AA 1.5V Usable
෭෭෭෭
Rechargeable Battery
(Li-ion)
14500 3.7V Banned
™™™™
Warning: please do not mix o using batteries of other manufacture, capacity, size or type. Doing so
will cause damages to the batteries or flashlights.
Notice: When use 2 fresh alkaline batteries, maybe due to the high voltage, the brightness of the
Low level will be close to that of the Mid in the early stage. However, after working some time,
the brightness of the Low will perform normally.
Battery Replacement
Unscrew the tail cap to put in the battery with the anode side (+) toward the light head. Simply
screw the tail cap back on to test.