V
3.0
TM
FENIEX.
2016
INSTRUCTION MANUAL
WEB.
www.feniex.com
5
Features & Specifications
Operating Voltage:
10-15V Reverse Polarity Protection
• A 24V to 12V step down converter is required for
24V applications.
Flashing Current Draw:
15 Amp
Available Colors:
Red, Amber, White, Blue or Green
• Order sheet available online.
•
For flash patterns, please refer to the flash pattern
list available online.
• Controller features pattern memory recall
Cobra Module Count:
22 modules (6 LEDs per module) = 132 total LEDs
Apollo Module Count:
34 modules (6 LEDs per module) = 204 total LEDs*
*Dual Color systems have 12 LEDs with 6 LED’s that light up on each at
a time.
LED Type:
4 watt high power
Lengths:
49″ 60″
Functions:
Center Out:
To engage, connect the left wire and the right arrow
wire together.
Cruise Mode:
Engages corners at 10% full brightness potential.
Dim Mode:
Dims full bar at 10% full brightness potential.
Arrow Flashing Mode:
Pattern displayed from Mode selected.
Alley Flashing Mode:
Pattern displayed from Mode 3 selection.
Requirements:
External 40 Amp fuse is required on the Red +12 AWG
wire.
Internal Controller Board:
Controller board is programmed to customer build
requirements. If the end user requires serviceability,
please contact Feniex for assistance.
Reverse Polarity Protection:
The light bar controller has built-in reverse polarity
circuit. This will protect the controller in the event the
user reverse connects the 12V (+) and 12V (-) inputs.
*Dual Color systems have a total of 12 LEDs with 6 LED’s that light up on each at
a time.
