Feniex Industries, Inc.
1.800.615.8350 /
feniex.com
7
WARNING MODES
Warning modes 0 and 1 can be configured to
use either the front or rear without activating
the full lightbar. Modes 2 and 3 can only be
programmed to have the full bar on or off.
Programming Mode 0:
Activate the mode
by extending the blue/white (front wire)
or the green/white (rear wire) to a 12v (+)
source. The front and rear can be used
together only if the same flash pattern is
selected.
Programming Mode 1:
Activate the mode
by extending the blue/white (front wire)
or the green/white (rear wire) to a 12v (+)
source. Overrides Mode 0. Mode 0 needs to
be activated for Mode 1 to function.
Programming Mode 2 & 3:
Activate the
mode by extending the mode wire to a 12v
(+) source. Mode 2 overrides Modes 0 and
1. Mode 3 overrides Modes 0, 1 and 2.
TAKEDOWN
Activate the factory configured takedown
function by extending the white wire to a 12v
(+) latching switch.
ALLEY LIGHTS
Activate the factory configured alley
lights by extending the red/black &
white wires to 12v (+) latching switches.
Takedown & alley functionality must be specified at time of order. Modules in takedown
and/or alley positions will only function as such, or flashing takedown/alley.
No warning
patterns will be displayed in takedown or alley positions.
ATTENTION:
WIRING INFORMATION & FUNCTIONS
TAKEDOWN & ALLEY FLASHING
Activate the factory configured takedown flashing function by extending the green wire to
a 12v (+) latching switch. For dual color models, warning mode 2 will be activated instead
of the flashing takedown function.
ARROW FUNCTIONS
Activate the arrow functions by
extending the white/black wire, black/
white wire, or a combination of both to
12v (+) latching switches.
Arrow functions will override all warning
modes on all rear-facing modules (not
including corners).
ATTENTION:
