FENDT ErgoSteer SP001V9810010, Operator'S Manual

Page: 37 / 40

4 Failure codes
ErgoSteer
SP001P001B01A 37
4.1 Failure codes
FMI-SPN Components Cause Consequence and remedy
SC-516257–9 Steering Joystick Missing CAN messages from
the joystick unit . Check that the steering joystick
cables are undamaged and
properly connected.
SC-516257–31 Steering Joystick Joystick steering paused
because of a steering wheel
intervention. Reactivate the steering joystick.
SC-516264–31 Steering Joystick Joystick steering paused
because armrest is in park
position (armrest up). Fold down the joystick steering
armrest.
SC-516265–12 Steering Joystick Steering joystick version
unknown. Check the software version of
your machine. This must be at
least NOV 2023 or older.
SC-516272–31 Steering Joystick Joystick unit rocker switch
(F/R) reports a defect. Have the component checked by
your dealer and replaced if
necessary.
SC-516273–31 Steering Joystick Joystick unit lead angle
reports a defect. Have the component checked by
your dealer and replaced if
necessary.
SC-516274–2 Steering Joystick Armrest of the joystick unit in
undefined position or switch
in armrest defective. Fold down the armrest. If the
error persists, contact your
dealer who can check or replace
the position sensor.
SC-516276–31 Steering Joystick Joystick unit upper button
(VG) reports a defect. Have the component checked by
your dealer and replaced if
necessary.
SC-516277–31 Steering Joystick Joystick unit feedback motor
reports a defect. Have the component checked by
your dealer and replaced if
necessary.