![background image](http://html1.mh-extra.com/html/fendt/ergosteer-sp001v9810010/ergosteer-sp001v9810010_operators-manual_4604905029.webp)
ErgoSteer
SP001P001B01A
29
3.1
Prerequisites for using the steering joystick
Fig. 1
•
Make sure that the joystick wiring harness is attached with the retaining clip.
•
Lay the joystick cable so that it is not kinked or crushed.
•
Adjust the steering wheel so that you can intervene in an emergency situation.
•
Connect the joystick electrical connector (1) to the 25 A socket on the machine.
•
Connect the joystick electrical connector (2) to the ISOBUS socket on the machine.
Summary of Contents for ErgoSteer SP001V9810010
