Do not operate the machine with the drive shaft
shields open or removed. Entanglement in drive
shafts that rotate can cause injury or death.
Stay clear of components that rotate.
Make sure that guards that rotate can rotate freely.
A loose yoke can come off a shaft and result in
injury to persons or damage to the machine.
When you install a quick disconnect yoke, the
spring activated locking pins must move freely and
be in the groove on the shaft. Pull on the driveline
to make sure that the quick disconnect yoke can
not be pulled off the shaft.
GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
Fig. 17
Remove spilled oil, antifreeze or fuel immediately
from the steps, platform, and other access areas.
Keep all access areas clean of unwanted materials.
GUID-3B306DB1-0777-4FA6-86F1-895652B4C1DB-high.jpg [High]
Fig. 18
When you do work on the machine, make sure
that the header and the reel are lowered.
When it is necessary for the header or the reel to
be in the up position, lift the header or reel to the
full up position and engage the cylinder stops.
WARNING:
If the machine has lift cylinder stops,
install the header lift cylinder stops
when you do work near the header.
Do not use the hydraulic system to
keep the header in the up position. A
sudden loss of hydraulic pressure can
cause the header to fall suddenly.
GUID-353ABA0B-44F7-4320-8E22-3E3CA612BD91-high.jpg [High]
Fig. 19
1. General
Pickup Header
1-13
79037386D
