1.3.1.9 Twine specifications
Type
High quality split film polypropylene
twine for low and middle force loads.
AGCO® brand twine for high force loads.
Storage capacity
36 balls
Minimum knot strength
Plunger load set below 465 kN
Twine rated for 2000 N to 2450 N (450
lbf to 551 lbf)
Plunger load set from 465 kN to 600 kN
Twine rated for 2891 N to 3336 N (650 lbf
to 750 lbf)
Plunger load set above 600 kN
AGCO® brand twine rated at 3336 N and
above (750 lbf and above)
Twine not made for use in this machine will not work correctly. Low quality, incorrect type, or incorrect
strength twine can cause knotter malfunction, and knotter and twine failures.
Crop with more spring-back will have to have stronger twine.
1.3.1.10 Knotter and needle specifications
Knotter quantity
6
Knotter type
double knot
Knotter spacing
176 mm (6.9 in)
Needle quantity
6
Protection
Shearbolt on the main drive sprocket
Knotter/needle lockout
Switch by the left rear corner of the bale
chamber
Needle protection linkage
Automatic, link to needle carriage
1.3.1.11 Bale chamber tension specifications
Control
Manual or automatic control hydraulics
Actuation
Spool type solenoid valve
System supply
Open center on board hydraulics
1.3.1.12 Ejector specifications
Number of teeth
12
Slide type
Ball bearing rollers
Power
Hydraulic cylinder
Cylinder diameter
64 mm (2.5 in)
Cylinder stroke
914 mm (36 in)
Valve
Enable valve/control valve
Operation
Switch and teeth selection at rear
GUID-2E186457-8B05-4204-AA26-D36C508F73BE [V1]
GUID-CD6992A9-182A-4431-B8CC-FD25225C6DBD [V1]
GUID-708B34DF-55F2-48EB-BD44-FAB8DCCD686D [V2]
GUID-17E4B1BA-CC96-4640-9293-7D1635E9DFF2 [V1]
1. General
Large Square Baler
1-25
79037317B
