background image

1.1.10.3  Personal protective equipment

Put on all personal protective equipment (PPE) and

protective clothes that are supplied to you or that

are necessary for the conditions and by applicable

laws. PPE includes equipment to prevent injury to

your eyes, lungs, ears, head, hands and feet.
Always keep hands, feet, hair, and your clothes

away from parts that move. Do not put on loose

clothing, jewelry, watches, or other items that can

tangle in parts that move. Tie up long hair that can

also tangle in moving parts.

GUID-1AEEBD1D-C71B-432C-9D23-52467D7C0BBF-high.jpg [High]

Fig. 8  

1.1.10.4  Seat instructions

Put on the seat belt before you operate the

machine. Always sit in the seat and have the seat

belt on while you operate the machine. Replace

the seat belts when they become worn or broken.
Do not use a seat belt loosely. Make sure that

there is some tension on the seat belt. Do not

wear the seat belt in a twisted condition or

pinched between the structural parts of the seat.
Put on the seat belt if the instructional seat is

used. Use the instructional seat only to train new

operators or to find a problem. The instructional

seat is only for short periods of use.
Do not let children use the instructional seat or be

in the cab. Do not let other persons use the

instructional seat or be in the cab.
Drive the machine at slower speed and on level

ground when the instructional seat is used. Do not

start, stop, or turn quickly when the instructional

seat is used. Do not drive on highways or public

roads when the instructional seat is used.

GUID-5BA328EA-7732-4CE8-97B2-6511151E943C-high.jpg [High]

Fig. 9  

1.1.10.5  Shield and guards

WARNING: Entanglement hazard.
Belts and components that rotate.

Severe personal injury or death can
occur.

Do not open, remove, or put your
hand behind shields if the engine is
running. Stop the machine before
doing service to the machine.

All shields and guards must be in the correct

position and in good condition. Keep away from

the components that rotate.

GUID-6163F2D6-39D6-48BF-871C-AC346EE022D2-high.jpg [High]

Fig. 10  

GUID-7FEFA67B-E06F-4EFE-A23E-738FE96997E9 [V3]

GUID-F38524AD-E24F-4FCC-9154-E5357EFDE9D2 [V3]

GUID-9398BDE6-F83A-4855-B266-E86D0B48B9D7 [V9]

1. General

1-10

Large Square Baler

79037317B

Summary of Contents for 1290 UD










































Reviews: