Pedal
Pedal rocker motion can be loosened or tightened using Pedal
Tension Adjustment mechanism (below).
LED On/Off Switch
On/off toggle control for two blue LEDs beneath the pedal that
provide backlight illumination.
Pedal Tension Adjustment
Loosens or tightens rocker movement of pedal (see next page).
To avoid damage to pedal assembly, do not over-tighten.
EXP Out Jack
1/4“ expression output for use with expression-compatible
amps, effects and other instruments/devices.
DC Power Connector
Standard center-negative 9VDC jack for use with appropriate
power supplies.
Input Jack
1/4” input for electric guitar, bass, acoustic guitars with pickup
systems, keyboards and other instruments.
Output Jack
1/4” output jack connects to amp or next pedal in signal
chain.
Battery Compartment
Battery power is for backlight LEDs only; pedal functionality is
not dependent on battery power. Battery compartment cover on
underside of pedal snaps open and shut easily; compartment
houses single 9-volt battery that lifts out easily for replacement
(see next page).
Summary of Contents for TREAD-LIGHT VOL/EXP PEDAL
Page 1: ...TREAD LIGHT VOL EXP PEDAL...
