40
When the amp’s WiFi is turned on, there are other network menu options in addition to “CONNECT.” These are
labeled “FORGET,” “MODIFY” and “INFO” (
see illustration below
). Use the ENCODER to scroll through and select
one of these options, which are described below.
FORGET: For disconnecting a network and removing it from the amp’s memory. To re-establish a connection
with a “forgotten” network, follow the steps for “ADD HIDDEN NETWORK” (
pages 38-39
).
MODIFY: For modifications to the current network’s displayed “SSID,” “PROTOCOL” and “PASSWORD” param-
ters. Use the ENCODER to scroll to and select one of these parameters, then turn and press the ENCODER to
enter individual characters until modifications are complete.
INFO: Displays the current network’s name (SSID), signal description, protocol, and connection status. This
information can
not
be modified by the user.
Close-up detail of DISPLAY WINDOW showing additional WiFi network options “FORGET,” “MODIFY” and “INFO”.
A green dot to the left of the network name indicates successful network connection.
In addition to connecting to a WiFi network from Rumble Studio 40 or Rumble Stage 800 itself, WiFi can also
be accessed using the Fender Tone app.
To do so, open the Fender Tone app on a mobile device and go into “Settings.” Then connect to Bluetooth
and select the “WIFI” option. From the “CHOOSE A NETWORK” screen, select “MANUAL SETUP.” The “MANUAL
SETUP” screen displays a list of three items from which the user can make a selection:
• NETWORK NAME: Use ENCODER to enter network name here.
• SECURITY WPA/NONE: Use ENCODER to select “WPA” if a password is needed; select “NONE” if not.
• PASSWORD: Use ENCODER to enter password and select “CONNECT” to initiate WiFi access.
WIFI CONNECTION USING FENDER TONE™ APP
MENU
WIFI ON
NETWORK 3
NETWORK 2
back
NETWORK 1
MENU
CONNECT
FORGET
INFO
MODIFY
back
