Fender Power Stage 100, Owner'S Manual, Page: 9 / 12

9
FULL MIX MONITOR SET UP
1. Connect your microphone to the Mic 1 In.
2. Connect a cord from the Mic 1 Out jack to your
main mixing console. This is a mic level signal.
3. Next, connect a cord from the monitor out on your
mixing console back to the Aux Line In jack on the
PowerStage 100. You now have a full monitor mix
with all effects from your mixing console in the
PowerStage 100. To turn up the full monitor mix,
turn up the Line volume (item C page 4).
4. Remember, turning up the mic 1 volume will
NOT affect the output of the main P.A. system,
but it will affect how much of your "dry" signal
you will hear.