MUSTANG
™
I / II
Getting Started
M U S T A N G ™
To set up your Mustang™ amplifier:
1 .
Plug in the amplifier power cord.
2 .
Plug your guitar into the INPUT jack.
3 .
Press the POWER switch to turn the amplifier ON.
4 .
Adjust the MASTER volume level.
♫
MASTER volume is the only knob you need to adjust at
first. All other knob settings are programmed as part of
each PRESET.
Select Presets
Use the PRESET knob to select one of 24 presets. Presets are
stored in three banks, colored AMBER, GREEN and RED.
Turn the PRESET knob to scroll through each bank of presets
in the following order:
Each preset is based on one of eight amplifier types labeled
next to each of the preset LEDs.
♫
The RED and GREEN banks are for storing your own
presets. The AMBER bank of presets can only be modi-
fied using Fender® FUSE™ software at
www.fender.com/
support
.
Effects
Use the MOD knob to select modulation type effects and use
the DLY / REV knob to select delay and reverb effects.
The MOD and DLY / REV knobs share the same three indicator
LEDs. The knob turned most recently has control of these LEDs.
The LEDs are numbered 1, 2, 3 and correspond to the three
positions within each of the selection ranges A, B, C, D on
each knob. Use the LEDs to determine exactly which position
the knob is pointing to, for example, A1, A2 or A3.
Effects Selections
The tables below list the effects selections for each knob.
MODULATION EFFECTS
A1
Chorus
A2
Chorus Deep
A3
Flanger
B1
Bias/Sine Tremolo
B2
Optical/Vintage Tremolo
B3
Optical/Vintage Tremolo Fast
C1
Vibratone Slow
C2
Vibratone Fast
C3
Octaver
D1
Phaser Slow Deep
D2
Phaser Medium
D3
Step Filter
AMBER
4
GREEN
4
RED
6
f e n d e r . c o m
