manualshive.com logo in svg

Fender Mustang GT40, Expanded Owner'S Manual

Share
Download
Fender Mustang GT40 Expanded Owner'S Manual Download Page 51

FIRMWARE UPDATES AND FACTORY RESTORE

As noted in the introduction, Mustang GT users should check regularly for firmware updates that improve 

and enhance the Mustang GT experience. To perform a Mustang GT firmware update, put the amp in WiFi 

update mode by pressing and holding the ENCODER for five seconds (

yellow arrow in illustration below

) while 

turning the amplifier on.

The DISPLAY WINDOW will then indicate that Mustang GT is searching for the latest firmware update, fol-

lowed by indication that the firware update is downloading (

see illustrations below

).

When the download is complete, the DISPLAY WINDOW will then indicate that Mustang GT is applying the 

firmware update, followed by indication that the firware update is complete and the amp should be restarted 

(

see illustrations below

).

49

SEARCHING FOR UPDATES...

DOWNLOADING UPDATES...

APPLYING UPDATES...

AMPLIFIER UPDATE COMPLETE

PLEASE RESTART YOUR AMP

Summary of Contents for Mustang GT40
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands