3. Rudder Settings and Servos
________________________________________________________________________
All servos are already installed in Femo flight models. The main wing rudders are
guided by RDS systems. The entire deflection is inside. In case of a servo damage
this can be exchanged via a prepared servo cover!
Please reduce the servo at your control first, then set the middle position. Then
raise the servo again to get the necessary rudder swings. In order not to burden the
servo unnecessarily, we recommend to prevent servo movements starting from the
rudder during transport and storage. Our area scissors are ideal for this purpose.
In the current versions, KSTX08 v 3.0 is installed these servos can be directly
be operated with 2s lipos.
When using the e-nose and the nose of the glider, it is advisable to create two
model memories. Since the centre of gravity is not 100% identical due to the nasal
change.
Settings
+
means "flap/rudder Down"
- means "flap/rudder up"
ELEV = Elevator
AILE = Aileron
RUDD = Rudder
Rashes max.:
AILE: -12/+6 (measured outside)
ELEV: -5/+5
RUDD: -12/+12
ELEV neutral: parallel to the hull
Speed:
AILE: -1,5mm
Snapflap AILE: +2,5mm
Thermal:
AILE:+1,5mm
Landing configuration:
QRAILÖE: -12mm
ELEV: -2mm